-
On the formation of GBF of high-strength steels in the very high cycle fatigue regime
Publication year: 2008
Y.B., Liu , Z.G., Yang , Y.D., Li , S.M., Chen , S.X., Li , ...
-
In-situ EBSD investigations of the asymmetric stress-induced martensitic transformation in TiNi shape memory alloys under bending
Publication year: 2008
S.C., Mao , X.D., Han , Y.B., Tian , J.F., Luo , Z., Zhang , ...
-
Enhanced mechanical properties in Ag-particle-dispersed PZT piezoelectric composites for actuator applications
Publication year: 2008
H.L., Zhang , J.-F., Li , B.-P., Zhang , W., Jiang
-
Vacuum Brazing of SiO2 Glass Ceramic and Ti-6Al-4V Alloy Using AgCuTi Filler Foil
Publication year: 2008
H.B., Liu , L.X., Zhang , L.Z., Wu , D., Liu , J.C., Feng
-
Grain structure and dislocation density measurements in a friction stir welded aluminum alloy using x-ray peak profile analysis
Publication year: 2008
Wanchuck, Woo , Levente, Balogh , Tamás, Ungár , Hahn, Choo , Zhili, Feng
-
Enhanced strength and plasticity of a Ti-based metallic glass at cryogenic temperatures
Publication year: 2008
Yongjiang, Huang , Jun, Shen , Jianfei, Sun , Zhefeng, Zhang
-
sEffect of thermal cycling on modulus and tensile strength of 3D needled C/SiC composite in controlled environments
Publication year: 2008
Jingjiang, Nie , Yongdong, Xu , Junqiang, Ma , Litong, Zhang , Laifei, Cheng , ...
-
Influence of Niobium Microalloying on Rotating Bending Fatigue Properties of Case Carburized Steels
Publication year: 2008
L., Ma , M.Q., Wang , J., Shi , W.J., Hui , H., Dong
-
The microstructural instability of a hot corrosion resistant superalloy during long-term exposure
Publication year: 2008
J.S., hou , J.T., Guo , L.Z., Zhou , H.Q., Ye
-
Microstructural Evolution of Mg-Al-Ca-Sr Alloy During Creep
Publication year: 2008
T., Sato , M.V., Kral
-
Microstructure and fatigue properties of the ultrafine-grained AM60 magnesium alloy processed by equal-channel angular pressing
Publication year: 2008
Olga, Kulyasova , Rinat, Islamgaliev , Bernhard, Mingler , Michael, Zehetbauer
-
Formation of a submicrocrystalline structure upon dynamic deformation of aluminum alloys
Publication year: 2008
I.G., Brodova , I.G., Shirinkina , O.A., Antonova , E.V., Shorokhov , I.I., Zhgilev
-
Deformation and failure of bulk nanograined and UFG materials
Publication year: 2008
E.C., Aifantis
-
Yielding and tensile behavior of nanocrystalline copper
Publication year: 2008
K.E., Aifantis , A.A., Konstantinidis
-
Sintering Behavior in Zirconium Phosphate Bonded Silicon Nitride Porous Ceramics
Publication year: 2008
Fei, Chen , Qiang, Shen , Julie M., Schoenung , Lianmeng, Zhang
-
Effects of Nanoclay Morphology on the Mechanical, Thermal, and Fire-Retardant Properties of Vinyl Ester Based Nanocomposite
Publication year: 2008
Gefu, Ji , Guoqiang, Li
-
Shock compression of Ti-B-Cu powder mixtures: Microstructural aspects
Publication year: 2008
D.V., Dudina , V.I., Mali , A.G., Anisimov , O.I., Lomovsky
-
The effect of annealing temperature on micro-structure and mechanical properties of C/SiC composites
Publication year: 2008
Yumin, Zhang , Yunlong, Zhang , Jiecai, Han , Yufeng, Zhou , Luyang, Hu , ...
-
On the Ductility of a Surface Severely Plastically Deformed Nickel Alloy
Publication year: 2008
J.W., Tian , L., Shaw , P.K., Liaw , K., Dai
-
Morphological changes of γ′ precipitates in superalloy IN738LC at various cooling rates
Publication year: 2008
S., Behrouzghaemi , R.J., Mitchell
-
Effect of ageing time on strength and microstructures of an Al-Cu-Li-Zn-Mg-Mn-Zr alloy
Publication year: 2008
Hongying, Li , Yi, Tang , Zaide, Zeng , Ziqiao, Zheng , Feng, Zheng
-
Strain Rate Effect on the Tensile Behavior of Duplex Ti-46.5Al-2Nb-2Cr Intermetallics at Elevated Temperatures
Publication year: 2008
Xiang, Zan , Yang, Wang , Yuanming, Xia , Yuehui, He
-
Splitting in Dual-Phase 590 High Strength Steel Plates - Part II: Quantitative Analysis and its Effect on Charpy Impact Energy
Publication year: 2008
Min, Yang , Yuh J., Chao , Xiaodong, Li , David, Immel , Jinzhu, Tan
-
Splitting in Dual-Phase 590 High Strength Steel Plates: Part I. Mechanisms
Publication year: 2008
Min, Yang , Yuh J., Chao , Xiaodong, Li , Jinzhu, Tan
-
Experimental Investigation of Heat Transport and Solidification during Low Frequency Electromagnetic Hot-top Casting of 6063 Aluminum Alloy
Publication year: 2008
Xiangjie, Wang , Haitao, Zhang , Yubo, Zuo , Zhihao, Zhao , Qingfeng, Zhu , ...
-
Gradient submicrocrystalline structure in Fe-Cr-Co system hard magnetic alloys
Publication year: 2008
G.F., Korznikova , A.V., Korznikov
-
Analysis of thermal behavior during equal channel multi-angular pressing by the 3-dimensional finite volume method
Publication year: 2008
Hyoung Seop, Kim
-
Processing properties of nano- and submicrocrystalline Ti-6Al-4V titanium alloy
Publication year: 2008
R. Ya., Lutfullin , A.A., Kruglov , R.V., Safiullin , M. Kh., Mukhametrakhimov , O.A., Rudenko
-
The link between microstructure and creep in ECAP aluminum
Publication year: 2008
I., Saxl , V., Sklenička , L., Ilucová , M., Svoboda , J., Dvořák , ...
-
Dynamic Tensile Behavior Of Materials With Previous Fatigue Damage
Publication year: 2008
U., Sánchez-Santana , C., Rubio-González , G., Mesmacque , A., Amrouche , X., Decoopman
-
Limits Of The Linear Viscoelastic Behaviour Of Polyamide 66 Filled With Tio2 Nanoparticles: Effect Of Strain Rate, Temperature, And Moisture
Publication year: 2008
Olesja, Starkova , Zhong, Zhang , Hui, Zhang , Hyung-Woo, Park
-
Microstructure and structural fatigue of ultra-fine grained NiTi-Stents
Publication year: 2008
M., Frotscher , P., Nörtershäuser , Ch., Somsen , K., Neuking , R., Böckmann , ...
-
Microstructural evolution and mechanical characteristics in nanocrystalline nickel with a bimodal grain size distribution
Publication year: 2008
M.J.N.V., Prasad , S., Suwas , A.H., Chokshi
-
Microstructural evolution in pure aluminum processed by high-pressure torsion
Publication year: 2008
Y., Ito , Z., Horita
-
Study of mechanical and corrosion properties of a Fe-21.4Cr-6Mn-1.5Ni-0.24N-0.6Mo duplex stainless steel
Publication year: 2008
Zhang, Wei , Jiang, Laizhu , Hu, Jincheng , Song, Hongmei
-
Microstructure and properties of Cu-1.0Cr-0.2Zr-0.03Fe alloy
Publication year: 2008
H.T., Zhou , J.W., Zhong , X., Zhou , Z.K., Zhao , Q.B., Li
-
Structure and mechanical properties of Al65Cu20Ti15-based amorphous/nanocrystalline Alloys prepared by high pressure sintering
Publication year: 2008
D., Roy , R., Mitra , T., Chudoba , Z., Witczak , W., Lojkowski , ...
-
Effect of interfacial thickness and residual stress on the mechanical property of the alumina-stainless steel braze joint interface
Publication year: 2008
Abhijit, Kar , Mainak, Ghosh , Ashok Kumar, Roy , Ajoy Kumar, Ray
-
Process Maps for Plasma Spraying of Yttria Stabilized Zirconia: An Integrated Approach to Design, Optimization and Reliability
Publication year: 2008
A., Vaidya , V., Srinivasan , T., Streibl , M., Friis , W., Chi , ...
-
Effects of thermo-mechanical treatment on a Fe-30Mn-6Si shape memory alloy
Publication year: 2008
C.H., Yang , H.C., Lin , K.M., Lin , H.K., Tsai
-
Effects of creep on interfacial stresses of bonded structures
Publication year: 2008
Qing-Qi, Chen , Fu-Zhen, Xuan , Shan-Tung, Tu
-
Deformation characteristics of as-received Haynes230 nickel base superalloy
Publication year: 2008
Yi, Liu , Rui, Hu , Jinshan, Li , Hongchao, Kou , Hongwei, Li , ...
-
Common trends in texture evolution of ultra-fine grained HCP materials during equal channel angular extrusion
Publication year: 2008
G.G., Yapici , I., Karaman
-
Three-dimensional representations of hardness distributions after processing by high-pressure torsion
Publication year: 2008
Cheng, Xu , Terence G., Langdon
-
Friction stir welding of accumulative roll bonded commercial purity aluminium AA1050 and aluminium alloy AA6016
Publication year: 2008
I., Topic , H.W., Höppel , M., Göken
-
Research on bulk nanostructured materials in Ufa: Twenty years of scientific achievements
Publication year: 2008
Terence G., Langdon
-
Three-dimensional finite element analysis of multi-pass equal channel angular extrusion of AA1050 with split dies
Publication year: 2008
Y.G., Jin , I.-H., Son , S.-H., Kang , Y.-T., Im
-
On Estimating the Fracture Toughness of Al-7Si-Mg Alloys by Sharp-Notch Tensile Test Results
Publication year: 2008
Murat, Tiryakioğlu , David, Hudak
-
Effect of Carbon content on Instantaneous Strain Hardening Behaviour of Powder Metallurgy Steels
Publication year: 2008
R., Narayanasamy , V.Anandakrishnan , K.S., Pandey
-
A Ballistic Material Model For Cross-Plied Unidirectional Ultra-High Molecular-Weight Polyethylene Fiber-Reinforced Armor-Grade Composites
Publication year: 2008
M., Grujicic , G., Arakere , T., He , W.C., Bell , B.A., Cheeseman , ...
|
