-
Thermal crown analysis of the roll in the strip casting process
Publication year: 2008
C.M., Park , J.T., Choi , H.K., Moon , G.J., Park
-
Effects of processing time on strengths, failure modes of dissimilar spot friction welds between aluminum 5754-O and 7075-T6sheets
Publication year: 2008
V.-X., Tran , J., Pan , T., Pan
-
Grey Relational Analysis Coupled with Principal Component Analysis for Optimization Design of the Cutting Parameters in High-Speed End Milling
Publication year: 2008
H.S., Lu , C.K., Chang , N.C., Hwang , C.T., Chung
-
A study on carbon concentration distribution, microstructure of P/M materials prepared by Carbusintering
Publication year: 2008
Xianfeng, Dong , Jiandong, Hu , Hongying, Wang , Shuangyu, Liu , Zuoxing, Guo
-
Fabrication of shape memory alloys using the plasma skull push-pull process
Publication year: 2008
C.J., de Araújo , A.A.C., Gomes , J.A., Silva , A.J.T., Cavalcanti , R.P.B., Reis
-
Laser Welding of Ti6Al4V Titanium Alloys
Publication year: 2008
E., Akman , A., Demir , T., Canel , T., Sınmazçelik
-
Slicing, cleaning, kerf analysis of germanium wafers machined by wire electrical discharge machining
Publication year: 2008
Dinesh, Rakwal , Eberhard, Bamberg
-
Microstructural analysis of the anode in gas metal arc welding (GMAW)
Publication year: 2008
S., Zielińska , F., Valensi , N., Pellerin , S., Pellerin , K., Musioł , ...
-
Prediction, Control of Subgrain Size in the Hot Extrusion of Aluminum Alloys with Feeder Plates
Publication year: 2008
Xavier, Velay
-
Numerical simulation, experimental verification of carburizing-quenching process of SCr420H steel helical gear
Publication year: 2008
Arif, Sugianto , Michiharu, Narazaki , Minoru, Kogawara , Atsushi, Shirayori , Soo-Young, Kim , ...
-
Processing Optimization, Surface Properties, Wear Behavior of HVOF Spraying WC-CrC-Ni Coating
Publication year: 2008
W., Fang , T.Y., Cho , J.H., Yoon , K.O., Song , S.K., Hur , ...
-
Kinematics of Metal Flow during Twist Extrusion Investigated with a New Experimental Method
Publication year: 2008
Y., Beygelzimer , A., Reshetov , S., Synkov , O., Prokof’eva , R., Kulagin
-
Dissimilar Welding of AISI 310 Austenitic Stainless Steel to Nickel-based Alloy Inconel 657
Publication year: 2008
H., Naffakh , M., Shamanian , F., Ashrafizadeh
-
Adaptation for tandem cold mill models
Publication year: 2008
Carlos Thadeu de Ávila, Pires , Henrique Cezar, Ferreira , Roberto Moura, Sales
-
Hot Shear Spinning of Cast Aluminium Alloy Parts
Publication year: 2008
Ken-ichiro, Mori , Minoru, Ishiguro , Yuta, Isomura
-
Comparison of tool life between ceramic and cubic boron nitride (CBN) cutting tools when machining hardened steels
Publication year: 2008
Y., Sahin
-
Influence of heat treatment on the internal friction of 2D-C/SiC composites
Publication year: 2008
Juntao, Hou , Shengru, Qiao , Guofeng, Lu , Chengyu, Zhang , Yuebing, Zhang
-
Transient Liquid Phase Diffusion Bonding of 6061-15 wt% SiCp in Argon Environment
Publication year: 2008
J., Maity , T.K., Pal , R., Maiti
-
High Rate Electrical Discharge Compaction Of Powders Under Controlled Oxidation
Publication year: 2008
M., Alitavoli , A., Darvizeh
-
Novel strengthening method of closed-cell aluminum foams through surface treatment by resin
Publication year: 2008
Koichi, Kitazono , Ryosuke, Suzuki , Yuta, Inui
-
Modified Strain-Life Equation to Consider the Effect of Different Prestrain Paths for Dual Phase Sheet Steel
Publication year: 2008
Q., Le , H., Kang , G., Kridli , A., Khosrovaneh , B., Yan
-
A Study of the Effects of Process Parameters for Injection Molding on Surface Quality of Optical Lenses
Publication year: 2008
Kuo-Ming, Tsai , Chung-Yu, Hsieh , Wei-Chun, Lo
-
Stress distribution in rotating composite structures of functionally graded solid disks
Publication year: 2008
A.M., Zenkour
-
Microstructural Characterization and Hardness evaluation of HVOF Sprayed Ni-5Al coatings on Ni - and Fe - based superalloys
Publication year: 2008
R.A., Mahesh , R, Jayaganthan , S., Prakash
-
Texture and mechanical properties evolution of a deep drawing medium carbon steel during cold rolling and subsequent recrystallization
Publication year: 2008
C., Herrera , N.B., Lima , A. Ferreira, Filho , R.L., Plaut , A.F., Padilha
-
Contact Pressure Evolution at the Die Radius in Sheet Metal Stamping
Publication year: 2008
M.P., Pereira , J.L., Duncan , W., Yan , B.F., Rolfe
-
Thermal decomposition kinetics of in situ reinforcing composite based on polypropylene and liquid crystalline polymer
Publication year: 2008
S., Saikrasun , S., Saengsuwan
-
Evaluation of effective parameters in metal bellows forming process
Publication year: 2008
Gh., Faraji , M. Mosavi, Mashhadi , V., Norouzifard
-
Microstructural Characterizations of Magnetron Sputtered Ti films on glass substrate
Publication year: 2008
Vipin, Chawla , R., Jayaganthan , A.K., Chawla , Ramesh, Chandra
-
Superplastic deformation of a heat-resistant Al-Cu-Mg-Ag-Mn alloy
Publication year: 2008
Xiao, Daihong , Wang, Jiannong , Chen, Kanghua , Huang, Baiyun
-
Microstructural evolution during fracture induced by high strain rate deformation of 100Cr6 steel
Publication year: 2008
K., Ryttberg , M. Knutson, Wedel , P., Dahlman , L., Nyborg
-
Optimization of machining parameters in magnetic force assisted EDM based on Taguchi method
Publication year: 2008
Yan-Cherng, Lin , Yuan-Feng, Chen , Der-An, Wang , Ho-Shiun, Lee
-
Analysis of coupled mechanical and thermal behaviors in hot rolling of large rings of titanium alloy using 3D dynamic explicit FEM
Publication year: 2008
M., Wang , H., Yang , Z.C., Sun , L.G., Guo
-
Modelling of Metal Flow and Oxidation During Furnace Emptying using Smoothed Particle Hydrodynamics
Publication year: 2008
Mahesh, Prakash , Paul, Cleary , John, Grandfield
-
Toroidal Grinding Method for Curved Cutting Edge Twist Drills
Publication year: 2008
C., Fetecau , F., Stan , N., Oancea
-
A novel two-step modifying process for preparation of chitosan-coated Fe3O4/SiO2 microspheres
Publication year: 2008
Zhongli, Lei , Xiaolong, Pang , Na, Li , Lin, Lin , Yanli, Li
-
Numerical Method Coupling Finite Elements and Boundary Elements to Model Forming Process Tools
Publication year: 2008
Dominique, Bigot , Jean-Marc, Roelandt , Hocine, Kebir
-
Meshing and choice of evaluating parameters of results in simulation of electromagnetic force for forming of sheet metal
Publication year: 2008
W., Xu , H.Y., Fang , X.S., Liu , J.G., Yang , D., Xu , ...
-
Computer Controlled System for Dieless Drawing of Tool Steel Bar
Publication year: 2008
Ronan, Carolan , Peter, Tiernan
-
Ti50Cu23Ni20Sn7 Bulk Metallic Glasses Prepared by Mechanical Alloying and Spark-Plasma Sintering
Publication year: 2008
Qiang, Li , Ge, Wang , Xueping, Song , Liang, Fan , Wentao, Hu , ...
-
Numerical Simulation of Flow Characteristics in Newly Co-rotating Triangle Arrayed Triple Screw Extruders
Publication year: 2008
X.Z., Zhu , H.Q., Yuan , W.Q., Wang
-
Hot Profile Extrusion of AA-6060 Aluminum Chips
Publication year: 2008
A.E., Tekkaya , M., Schikorra , D., Becker , D., Biermann , N., Hammer , ...
-
Microstructural Study Of Cryogenically Treated En 31 Bearing Steel
Publication year: 2008
S., Harish , A., Bensely , D. Mohan, Lal , A., Rajadurai , Gyöngyvér B., Lenkey
-
Effects of ablation at different regions in three dimensional orthogonal C/SiC composites ablated by oxyacetylene torch at 1800oC
Publication year: 2008
Bo, Yan , Zhaofeng, Chen , Jianxun, Zhu , Jianzhong, Zhang , Yun, Jiang
-
Electrophoretic deposition of manganese dioxide –carbon nanotube composites.
Publication year: 2008
J., Li , I., Zhitomirsky
-
Fatigue life behaviour of the dual-phase low carbon steel sheets
Publication year: 2008
S.K., Akay , M., Yazici , A., Bayram , A., Avinc
-
Extraction of pure natural hydroxyapatite from the bovine bones bio waste by three different methods
Publication year: 2008
Nasser A.M., Barakat , Myung Seob, Khil , A.M., Omran , Faheem A., Sheikh , Hak Yong, Kim
-
Roll Forming of Partially Heated Cold Rolled Stainless Steel
Publication year: 2008
Michael, Lindgren , Ulf, Bexell , Lars, Wikström
-
An Innovative Extrusion Die Layout Design Approach for Single-hole Dies
Publication year: 2008
Chao, Lin , Rajesh S., Ransing
-
Ring rupture strength and hardness of sintered hot—Forged 1.5Mo alloyed carbon steels
Publication year: 2008
S., Shanmugam , K.S., Pandey , Syed Ummer M., Thangal
|
