-
Investigation of characteristics of tin-based white metals as a bearing material
Publication year: 2008
M. Moazami, Goudarzi , S.A. Jenabali, Jahromi , A., Nazarboland
-
Corrosion behaviour of superferritic stainless steels cathodically modified with minor additions of ruthenium in sulphuric and hydrochloric acids
Publication year: 2008
Peter Apata, Olubambi , Johannes H., Potgieter , Lesley, Cornish
-
Finite element modeling and failure prediction of friction stir welded blanks
Publication year: 2008
Amir Abbas, Zadpoor , Jos, Sinke , Rinze, Benedictus
-
An Integrated Re-Engineering Plan for the Manufacturing of Aerospace Components
Publication year: 2008
F., Javidrad , R., Rahmati
-
The least square support vector regression coupled with parallel sampling scheme metamodelling technique and application in sheet forming optimization
Publication year: 2008
Wang, Hu , Li, Enying , Li Guang, Yao
-
Effect of VC and nano TiC addition on the microstructure and properties of micrometre grade Ti(CN)-based cermets
Publication year: 2008
Wang, Jun , Liu, Ying , Zhang, Ping , Ye, Jinwen , Tu, Mingjing
-
Effects of deep cryogenic treatment on static mechanical properties of 18NiCrMo5 carburized steel
Publication year: 2008
Paolo, Baldissera , Cristiana, Delprete
-
Effect of Growth Rate on Microstructure and Mechanical Properties in a Directionally Solidified Nb-silicide base Alloy
Publication year: 2008
Y.X., Tian , J.T., Guo , G.M., Cheng , L.Y., Sheng , L.Z., Zhou , ...
-
Development of Novel Multilayer Materials for Impact Applications: a Combined Numerical and Experimental Approach
Publication year: 2008
A., Tasdemirci , I.W., Hall
-
Temperature dependence of tensile behavior of a high nitrogen Fe-Cr-Mn-Mo stainless steel
Publication year: 2008
Wei, Wang , Songtao, Wang , Ke, Yang , Yiyin, Shan
-
High temperature cyclic pressurization of titanium ducts for use in aircraft pneumatic systems
Publication year: 2008
C.A.R.P., Baptista , M.J.R., Barboza , A.M.L., Adib , M., Andrade , C., Otani , ...
-
Fracture energy determination and critical crack propagation between core and veneer ceramic interface by experiment and finite element method
Publication year: 2008
M. Evren, Toygar , Mustafa, Toparli , Faruk, Sen , Mehmet Ali, Gungor
-
A higher-order displacement model for stress concentration problems in general lamination configurations
Publication year: 2008
Wu, Zhen , Chen, Wanji
-
Shear Punch Testing and Fracture Toughness of Bulk Nanostructured Silver
Publication year: 2008
L., Zhang , A.M., Elwazri , T., Zimmerly , M., Brochu
-
Modeling and limits of strength of nanoporous foams
Publication year: 2008
H.L., Fan , D.N., Fang
-
Fatigue Life Assessment of an Innovative Laptop Hinge
Publication year: 2008
K.-C., Liao , Y.-A., Cian , W.-C., Lin
-
Upper-Bound Analysis of Dual Equal Channel Lateral Extrusion
Publication year: 2008
B., Talebanpour , R., Ebrahimi
-
The Effects of Ageing on Machinability of 6061 Aluminium Alloy
Publication year: 2008
Halil, Demir , Süleyman, Gündüz
-
Effect of the recoating and the length on fiber Bragg grating sensors embedded in polymer composites
Publication year: 2008
A., Vieira , R., de Oliveira , O., Frazão , J.M., Baptista , A.T., Marques
-
Surface Modification of AISI 410 Stainless Steel Using Laser Engineered Net Shaping (LENSTM)
Publication year: 2008
B. Vamsi, Krishna , Amit, Bandyopadhyay
-
Corrosion resistant material selection for the manufacturing of marine diesel exhausts scrubbers
Publication year: 2008
E., Aragon , J., Woillez , C., Perice , F., Tabaries , M., Sitz
-
UV aging characterization of epoxy varnish coated steel upon exposure to artificial weathering environment
Publication year: 2008
Jianwen, Hu , Xiaogang, Li , Jin, Gao , Quanlin, Zhao
-
Analysis of the effect of reinforcement particles on the compressibility of Al-SiC composite powders using a neural network model
Publication year: 2008
H.R., Hafizpour , M., Sanjari , A., Simchi
-
Reduction of aesthetical properties of organic coatings caused by mechanical damage
Publication year: 2008
S., Rossi , F., Deflorian , E., Scrinzi
-
Materials and Process Selection for Engineering Design.
Publication year: 2008
K.L., Edwards
-
Microstructural characterization of ti-6al-4v machining chips after remelting and severe deformation
Publication year: 2008
Abdel-Wahab, El-Morsy
-
Analytical modelling for residual stresses produced by shot peening
Publication year: 2008
Andreza S., Franchim , Valdemir S., de Campos , Dilermando N., Travessa , Carlos, de Moura Neto
-
Evaluation of AISI 316L stainless steel welded plates in heavy petroleum environment
Publication year: 2008
Cleiton Carvalho, Silva , Jesualdo Pereira, Farias , Hosiberto Batista, de Sant’Ana
-
Influence of natural and accelerated weathering on various formulations of linear low density polyethylene (LLDPE) films
Publication year: 2008
S.M., Al-Salem
-
Boriding of diffusion bonded joints of pure nickel to commercially pure titanium
Publication year: 2008
O., Torun , İ., Çelikyürek
-
The Study on the Fatigue FEM Analysis Considering the Effect of Stamping
Publication year: 2008
Wang, Wu-rong , Chen, Guanlong , Lin, Zhong-qin
-
Flexural behaviour of one-way concrete slabs reinforced with steel bars milled from scrap metals
Publication year: 2008
Mark, Adom-Asamoah , Charles K., Kankam
-
Effect of carbon black loading on the swelling and compression set behavior of SBR and NBR rubber compounds
Publication year: 2008
A., Mostafa , A., Abouel-Kasem , M.R., Bayoumi , M.G., El-Sebaie
-
Impact of Sea and Tap Water Exposure on the Durability of GFRP Laminates
Publication year: 2008
Saud, Aldajah , Ghydaa, Alawsi , Safaa Abdul, Rahmaan
-
Influence of austenitizing temperature on microstructure and mechanical properties of AISI 431 martensitic stainless steel electron beam welds
Publication year: 2008
A., Rajasekhar , G. Madhusudhan, Reddy , T., Mohandas , V.S.R, Murti
-
Corrosion Characteristic of Ce Al Brass in Comparison with As Al Brass
Publication year: 2008
J.L., Chen , Z., Li , Y.Y., Zhao
-
Influence of vibration on the solidification behaviour and tensile properties of an Al-18wt%Si alloy
Publication year: 2008
G., Chirita, , I., Stefanescu , D., Soares , F.S., Silva
-
Blocking and filtering effect of Bombyx mori silkworm silk fiber filter tips against mainstream smoke of cigarettes
Publication year: 2008
BaoZhong, Tian , Ping, Chen , Jian, Chen , Lun, Bai
-
Fabrication and Study on Tribological Characteristics of Cast Copper-TiO2- Boric acid hybrid composites
Publication year: 2008
C.S., Ramesh , R. Noor, Ahmed , M.A., Mujeebu , M.Z., Abdullah
-
A Study on High Temperature Gas Nitriding and Tempering heat Treatment in 17Cr-1Ni-0.5C
Publication year: 2008
H.W., Lee , J.H., Kong , D.J., Lee , H.Y., On , J.H., Sung
-
Insight into the effect of CB loading on tension, compression, hardness and abrasion properties of SBR and NBR filled compounds
Publication year: 2008
A., Mostafa , A., Abouel-Kasem , M.R., Bayoumi , M.G., El-Sebaie
-
Study on the Effects of the Length and Angle of Inclined Plate on the Thixotropic Microstructure of A356 Aluminum Alloy
Publication year: 2008
Farshid, Taghavi , Ali, Ghassemi
-
Mechanical Characterization of Bone Cement using fiber Bragg grating sensors
Publication year: 2008
C., Frias , O., Frazão , S., Tavares , A., Vieira , A.T., Marques , ...
-
Evaluation of grain refinement and variation in mechanical properties of equal-channel angular pressed 2014 aluminum alloy
Publication year: 2008
C., Mallikarjuna , S.M., Shashidhara , U.S., Mallik
-
Study on the Effect of prolonged mechanical vibration on the grain refinement and density of A356 Aluminum alloy
Publication year: 2008
Farshid, Taghavi , Hasan, Saghafian , Yousef H.K., Kharrazi
-
Analysis of thermo-visco-plastic behaviour of six high strength steels
Publication year: 2008
A., Rusinek , J.A., Rodríguez-Martínez , J.R., Klepaczko , R.B., Pęcherski
-
Analysis of the effect of temperature on the creep parameters of composite material
Publication year: 2008
A., Kouadri-Boudjelthia , A., Imad , A., Bouabdallah , M., Elmeguenni
-
Calibration and characterisation with a new laser-based magnetostriction measurement system
Publication year: 2008
A., Rafferty , S., Bakir , D., Brabazon , T., Prescott
-
Experimental study of the Plastic Deformation and Densification Behaviour of some Sintered Low Alloy P/M Steels
Publication year: 2008
R., Chandramouli , T.K., Kandavel , D., Shanmugasundaram
-
Influence of counterface roughness on friction properties of engineering plastics for bearing applications
Publication year: 2008
Virginio, Quaglini , Paolo, Dubini , Daniela, Ferroni , Carlo, Poggi
|
